Wifi Settings
dev.wireless.wifi.settings - wire path w\w\e - generated from fwMenuWifiSettings.
enable_station_mode
Enable Station Mode. Connect the device to an existing Wi-Fi network in station mode, or disconnect from it
Wire command: w\w\e\s
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.enable_station_mode() -> Result
ow_status ow_wireless_wifi_settings_enable_station_mode(ow_device* dev);
dev.wireless().wifi().settings().enable_station_mode() -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.enable_station_mode() # check dev.ok
s_sid_for_station_mode
SSID for Station Mode. Set the name (SSID) of the Wi-Fi network to join in station mode
Wire command: w\w\e\e
| Arg | Wire type |
|---|---|
| value |
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.s_sid_for_station_mode(value: str) -> Result
ow_status ow_wireless_wifi_settings_s_sid_for_station_mode(ow_device* dev, const char* value);
dev.wireless().wifi().settings().s_sid_for_station_mode(value: &str) -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.s_sid_for_station_mode(value) # check dev.ok
password_for_station_mode
Password for Station Mode. Set the password used to join the Wi-Fi network in station mode
Wire command: w\w\e\p
| Arg | Wire type |
|---|---|
| value |
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.password_for_station_mode(value: str) -> Result
ow_status ow_wireless_wifi_settings_password_for_station_mode(ow_device* dev, const char* value);
dev.wireless().wifi().settings().password_for_station_mode(value: &str) -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.password_for_station_mode(value) # check dev.ok
enable_ap_mode
Enable AP Mode. Turn the device's own Wi-Fi access point on or off
Wire command: w\w\e\a
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.enable_ap_mode() -> Result
ow_status ow_wireless_wifi_settings_enable_ap_mode(ow_device* dev);
dev.wireless().wifi().settings().enable_ap_mode() -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.enable_ap_mode() # check dev.ok
a_p_auth
AP Auth. Choose the Wi-Fi security type used by the device's own access point
Wire command: w\w\e\u
| Arg | Wire type |
|---|---|
| value |
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.a_p_auth(value: int) -> Result
ow_status ow_wireless_wifi_settings_a_p_auth(ow_device* dev, int32_t value);
dev.wireless().wifi().settings().a_p_auth(value: i32) -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.a_p_auth(value) # check dev.ok
a_p_hide_ssid
AP hide SSID. Hide the access point's network name (SSID) so it isn't broadcast to nearby devices
Wire command: w\w\e\i
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.a_p_hide_ssid() -> Result
ow_status ow_wireless_wifi_settings_a_p_hide_ssid(ow_device* dev);
dev.wireless().wifi().settings().a_p_hide_ssid() -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.a_p_hide_ssid() # check dev.ok
s_sid_for_ap
SSID for AP. Set the network name (SSID) broadcast by the device's own access point
Wire command: w\w\e\g
| Arg | Wire type |
|---|---|
| value |
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.s_sid_for_ap(value: str) -> Result
ow_status ow_wireless_wifi_settings_s_sid_for_ap(ow_device* dev, const char* value);
dev.wireless().wifi().settings().s_sid_for_ap(value: &str) -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.s_sid_for_ap(value) # check dev.ok
password_for_ap
Password for AP. Set the password required to join the device's own access point
Wire command: w\w\e\x
| Arg | Wire type |
|---|---|
| value |
Returns: none (Ok/Err only)
dev.wireless.wifi.settings.password_for_ap(value: str) -> Result
ow_status ow_wireless_wifi_settings_password_for_ap(ow_device* dev, const char* value);
dev.wireless().wifi().settings().password_for_ap(value: &str) -> Result<(), OwError>
The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).
dev.wireless.wifi.settings.password_for_ap(value) # check dev.ok