Skip to main content

Orca Communication

dev.hardware.settings_home.orca_settings - wire path h\s\g - generated from fwMenuOrcaSettings.

orca_com_over_uart​

Orca Com over UART. Set Communication protocol for connected Orca device over UART

Wire command: h\s\g\u

ArgWire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.orca_settings.orca_com_over_uart(value: int) -> Result
ow_status ow_hardware_settings_home_orca_settings_orca_com_over_uart(ow_device* dev, int32_t value);
dev.hardware().settings_home().orca_settings().orca_com_over_uart(value: i32) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.orca_settings.orca_com_over_uart(value)   # check dev.ok