Sensor Settings

dev.hardware.settings_home.sensor_settings - wire path h\s\v - generated from fwMenuSensorSettings.

accel_range

Accel Range. Accelerometer full-scale range index

Wire command: h\s\v\a

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.accel_range(value: int) -> Result

ow_status ow_hardware_settings_home_sensor_settings_accel_range(ow_device* dev, int32_t value);

dev.hardware().settings_home().sensor_settings().accel_range(value: i32) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.accel_range(value)   # check dev.ok

gyro_range

Gyro Range. Gyroscope full-scale range index

Wire command: h\s\v\g

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.gyro_range(value: int) -> Result

ow_status ow_hardware_settings_home_sensor_settings_gyro_range(ow_device* dev, int32_t value);

dev.hardware().settings_home().sensor_settings().gyro_range(value: i32) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.gyro_range(value)   # check dev.ok

move_threshold

Move Threshold. The amount accel must change to signal movement

Wire command: h\s\v\m

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.move_threshold(value: int) -> Result

ow_status ow_hardware_settings_home_sensor_settings_move_threshold(ow_device* dev, int32_t value);

dev.hardware().settings_home().sensor_settings().move_threshold(value: i32) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.move_threshold(value)   # check dev.ok

t_cal_scale

TCal Scale. Temperature calibration, the m of mX+b

Wire command: h\s\v\s

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.t_cal_scale(value: float) -> Result

ow_status ow_hardware_settings_home_sensor_settings_t_cal_scale(ow_device* dev, double value);

dev.hardware().settings_home().sensor_settings().t_cal_scale(value: f64) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.t_cal_scale(value)   # check dev.ok

t_cal_offset

TCal Offset. Temperature calibration, the b of mX+b

Wire command: h\s\v\o

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.t_cal_offset(value: float) -> Result

ow_status ow_hardware_settings_home_sensor_settings_t_cal_offset(ow_device* dev, double value);

dev.hardware().settings_home().sensor_settings().t_cal_offset(value: f64) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.t_cal_offset(value)   # check dev.ok

stream_defaults

Stream Defaults. Bitmask of sensor streams enabled at boot: 1 accel-legacy, 2 temp, 4 motion, 8 field, 16 env, 32 orientation

Wire command: h\s\v\b

Arg	Wire type
value

Returns: none (Ok/Err only)

dev.hardware.settings_home.sensor_settings.stream_defaults(value: int) -> Result

ow_status ow_hardware_settings_home_sensor_settings_stream_defaults(ow_device* dev, int32_t value);

dev.hardware().settings_home().sensor_settings().stream_defaults(value: i32) -> Result<(), OwError>

The C and Rust signatures above are also the WASM guest signatures - the device API surface is identical; only the transport differs (ow_open_wasm(&dev) in C, OneWili::open() in Rust).

dev.hardware.settings_home.sensor_settings.stream_defaults(value)   # check dev.ok